Benefits Of Installing A Concrete Garage Apron

A concrete apron is a wonderful addition to any home. Let our experienced Minneapolis/St. Paul concrete contractors install a new or replacement concrete garage apron today. There are several benefits to this driveway addition. First, concrete is the most durable driveway paving material available. Asphalt will not stand up as well to our harsh Minnesota Winters, only concrete can provide years of reliability. A concrete apron will also provide protection to your foundation from salt and water damage. A new apron will not only increase the curb appeal of your home, but will add value to your property.

A new or replacement concrete garage apron is a wonderful addition to any home. A garage apron is the concrete section spanning from the front of your garage floor out to the driveway. If there is damage on your asphalt where it comes in contact with your garage, then a concrete apron is the perfect solution for you. Let our experienced Minneapolis/St. Paul concrete contractors cut out the damaged area and replace it with a new concrete apron.

Benefits Of Installing A Concrete Garage Apron

There are several benefits to installing a concrete apron at your home. A new or replacement apron can provide protection to your foundation wall that sits under the front of your garage floor, increase curb appeal and boost the value of your home.

Preventing Damage to Your Foundation: Once damage to your existing concrete or asphalt apron has occurred, your foundation is left vulnerable to damage from water and salt. Installing a concrete apron will provide years of protection for your foundation while providing a smooth transition in and out of your garage for vehicles and equipment.

Provide a Smooth Transition: On top of providing protection to your foundation this driveway addition will also provide you a smooth transition as you drive vehicles and equipment in and out of your garage.

Increase Curb Appeal: Installing a new, clean concrete apron will dramatically increase your homes curb appeal.

Increase Property Value: Any new concrete addition to your home will increase your property value. A new concrete driveway or apron is one of the most functional and valuable updates you can do to your home.

Getting a Written Estimate

Every property is unique and will require an onsite evaluation to determine the scope of work. From this site visit, our estimator will be able to provide you with a detailed, written proposal outlining the work that will be performed, the materials that will be used and an estimated cost for your project. There are several things that go into our written proposals including how much existing concrete and/or asphalt must be removed, how much fill and class 5 is needed, the total square footage, the type of concrete mixture needed and the location of the property.

Concrete aprons should be at least three feet deep to properly protect your foundation wall under your garage floor. If your sidewalk extends to meet your driveway we will pour the concrete apron to expand out to the far edge of the sidewalk. This will be ascetically pleasing and will add to the curb appeal to your home.

How Does Weather Affect Curing And Pouring Concrete + Seasonal Pouring Tips You Should Know About

Concrete is present in many construction projects focused on a stable and strong structure. However, weather can play a vital role when the solidness of this material comes to mind, but also its durability. With the climate changes, concrete may suffer adverse effects on its solidness and durability – especially in the colder days.

The definition of cold for concrete is any temperature less than 40 F lasting for at least three days. Simply because the cement mixture transforms to solid through a series of chemical reactions, it is up to the current temperature at the moment to determine how fast the material will dry. Furthermore, if the weather is warm, the drying will be fast. But if the temperatures are low – it may trigger the water to freeze which results in the material breaking apart in pieces.

The Optimal Weather Temperature For Pouring And Curing Concrete

The liquid form of concrete, in fact the mixture – must be the one that is maintained within the temperature range from 50 F to 75 F so that it prevents becoming concrete. Additionally, if concrete is not cured properly it can result with a shorter lifespan, an optimal strength against weather conditions and ultimately, cracking. After the phase of layering the concrete finishes, the pouring process should start.

Curing concrete refers to keeping the concrete aprons, driveways and curb repairs wet for at least three days to prevent them from transforming into solid materials. The best way to do this is either by using sprinklers and hoses or by covering the area with plastic to hold and prevent the water from drying. However, if the temperatures are freezing – straw is one of the bet solutions in order to insulate the slabs.

Extreme Weather Conditions And How They Affect Concrete

During the snowy winter when it is very cold, concrete should never be poured simply because of the freezing effects it may result with. That is why using curing blankets for concrete is probably the best way in freezing conditions, however there are many anti-freeze mixtures that can be added to the layer to prevent it from freezing. Warming up the concrete so it resists the cold temperature and for it to dry in the best way possible is essential for every concrete driveway installation or renovation.

On the other side, when the weather is extremely hot, concrete can dry with lots of cracks, again resulting with damage. That is why pouring the coolest part of the day or night should be reserved for pouring concrete – simply because of the evaporation which is lower in these times. Additionally, special windbreaks and sunshades should be utilized in order to control the temperature of the concrete surface and result with pouring done in the right way during extreme weather.

Concrete Pouring Tips And Practices

During the winter, the extensive freeze-thaw conditions may be the force that spalls and scales concrete. However, with the proper mix design, placement and curing concrete in the right way – long-term durability can be ensured.

The primary considerations when curing concrete are focused on using blankets for heat retention, just because of the natural power of concrete to warm itself. Curing concrete in the winter can also adopt some chemical strategies as well as using solvent-based curing compounds or cure-and-seat chemicals. In general, proper planning and communication are the main prerequisites for a successful concrete winter pour.

Special Equipment Needed For Curing Concrete In The Winter

Obviously, pouring concrete is not an easy job in extreme temperatures. It is a job that uses a special equipment for it to be applied correctly, which may include but is not limited to:

curing blankets

non-water-based curing compounds


sprayers to apply the curing compounds

proper cold-weather attire for the crew pouring and finishing the concrete

concrete pumps to speed up the placement in cold conditions

ground heaters if the ground is frozen before the pouring occurs

Pouring And Curing Concrete By Seasons

Spring – Although spring is very short in Minnesota, proper concrete installment or renovation can be completed successfully. With the threat of snow and freezing temperatures gone, the only consideration during spring which may affect concrete badly is rain. During spring, the best way to set concrete quickly and uniformly is to use chemical set accelerators as well as special curing practices such as plastic sheeting, surface evaporative control agents etc.

Summer – The hot and humid summer requires a special use of admixtures to extend the set time. Therefore, hydration stabilizers and water reducers are a common choice when installing concrete and making sure of its proper durability. In these hot and humid days, the best way to finish an exterior concrete project is to do a quick placement with plastic sheeting to prevent the concrete from any sudden rainfall and sprayers to apply the evaporative control chemicals.

Fall – Fall may be the most stable weather condition for pouring exterior concrete. With a low humidity and warm days with cool nights, the placement and curing practices on concrete should also include the use of curing compounds and cure-and-seal chemicals with special blankets.

Winter – We already talked about the special treatment of concrete in winter above, with all the equipment needed and the recommended way to pour and cure concrete accordingly.

A Final Word

In the end, what you should know about curing and pouring concrete in Minnesota is that the main factor is the free water to cement ratio. If it is low, you will struggle to get it to compact properly which may result in air voids and weak concrete. On the contrary, if the water content is too high, it will leave pores in the concrete which may reduce the strength and durability.

Undoubtedly, a professional concrete installation or renovation is what every home and business owner needs in Minnesota in order to treat the risky concrete materials on the exterior in the right way. For more information on our concrete installation, renovation, repair and other services, you can contact our team at Minnesota Concrete directly and get a free estimate.

Which Types Of Driveways Last The Longest?

Do you want to improve your home and make it more attractive, stylish and ultimately – long-lasting? If yes is your answer, you can start with your driveway as one of the most frequent areas outside of your home. Renovating your driveway or even constructing a new good looking and durable driveway can be the best idea you ever had. Why?

Many people want to improve their homes and make them look attractive and stylish. Apart from what’s inside the house and the usual renovations made to the kitchen and garage, the driveway is among the most valuable areas of a home or property – simply because it introduces us and everyone visiting us to our home.

We all want to have the best driveways for our homes, don’t we? But is there a driveway that will last the longest?

In fact, there are many types of driveways you can choose from, and most usually they depend on the variety of building materials used. The most common and durable materials for installing new or renovating your driveways or even garage spaces include cement, concrete, cobblestone, brick, natural stones and many other materials.

However, you should know the benefits of the longest lasting driveways, which we are running through in details below.

Concrete Driveways – How Long Do They Last?

We all know that concrete is one of the most durable materials present, and therefore concrete driveways share the same benefits. However, when choosing concrete for your driveway, you should have in mind the concrete aprons and concrete curb repair that may be needed for your home.

In general, concrete offers a variety of benefits mainly linked to the process of its pouring and how well it was. Both residential and commercial concrete driveways can last for 20 years, and there are many cases in which concrete is known to last for even 30 years or longer.

With a minimal maintenance efforts and having in mind several variables such as the weather, water runoff and quality of installation, the concrete driveways, aprons and curb repair deliver a long-lasting quality and a long lifespan. That being said, concrete is among the top choices for long-lasting driveways.

Driveways Made From Bricks – How Long Do They Last?

Brick is another very popular material used for long-lasting driveways. Although brick driveways are much more expensive than any of the other types mentioned, creating a brick driveway is a process similar to putting together a puzzle – mainly because it includes a large variety of pieces – all of which putting together a puzzle that is pretty much complicated to be positioned.

While standard bricks are the most popular choice, bricks made from cobble stone can be a more expensive choice delivering utmost luxury and style. When talking about durability, residential and commercial brick driveways take pride of having a long lifespan which can be 50 years or even longer. Therefore, it is evident why this choice is more expensive, yet cost-effective in the long run.

Asphalt Driveways – How Long Do They Last?

We all know asphalt as a top-quality material from its use on the streets, hence its popularity at homeowners looking for quality driveways. The truth is, asphalt is an economical and durable option when choosing to renovate or install a new driveway and it offers a stylish black look which can be amazingly inviting to every visitor.

Speaking of asphalt driveways and durability, it is known that the asphalt suffers damages from larger vehicle traffic but also situations in which the water runoff crosses the maximum. With a lifespan of 20 to 30 years, these materials are also among the top choices for driveway and even though they may be risky when it comes to bad weather, asphalt repair is a cost-effective option to get your asphalt driveway renovated quick and easy.

The process of installing an asphalt driveway includes a special asphalt sealcoating which includes thorough power edging and power edge cleaning as one of the main prerequisites.

Gravel Driveways – How Long Do They Last?

Gravel and crashed stone driveways are also among the top choices for a new driveway to many any residential and business owners. The fact that gravel driveways are amazingly affordable and easy to be maintained compliments the choice and adds up to its cost-effectiveness.

Installing a gravel driveway will benefit you if your budget is tight and you want a material that can be installed quickly – gravel takes as little as one to three days to be installed. On the other side, gravel driveways come with a smaller lifespan than the other materials and may last from 3 up to 9 years, depending on the weather. Gravel driveways are not recommended for regions with a lot of sow and frequent snowfall simply because maintaining them is difficult in these occasions.


Remember, choosing a driveway that will last is an important choice every home or business owner has to make. While making the home more inviting, attractive and modern, a top-quality driveway material will result with amazing quality and enhance the beauty of your vehicle area and home.

In the end, you should know that installing a new driveway or renovating your existing asphalt, concrete or gravel one may also come with a special protection and installing new sidewalks and patios to complement the style. Speaking of protection, drainage systems and waterproofing are additionally options you can consider when renovating your driveway, resulting in an inviting home and a top-quality area reserved for your vehicle(s).

If you need more information on renovating your driveway or installing a new concrete, asphalt or gravel driveway for your Minnesota home, you can contact us at Minnesota concrete and rest assured of having the right team taking care of your concrete driveway in the most professional way.